Finishing Techniques
Wood finishing starts with sanding by hand (typically using a sanding block or power sander), scraping, or planing. Imperfections or nail holes on the surface may be filled using wood putty or pores may be filled using wood filler. Often, the wood's colour is changed by staining, bleaching, or any of a number of other techniques.
Once the wood surface is prepared and stained, the finish is applied. It usually consists of several coats of wax, shellac, drying oil,lacquer, varnish, or paint, and each coat is typically followed by sanding.
Finally, the surface may be polished or buffed using steel wool, pumice, rotten stone or other materials, depending on the shine desired. Often, a final coat of wax is applied over the finish to add a degree of protection.
French polishing is a finishing method of applying many thin coats of shellac using a rubbing pad, yielding a very fine glossy finish.
Ammonia fuming is a traditional process for darkening and enriching the color of white oak. Ammonia fumes react with the natural tannins in the wood and cause it to change colours. The resulting product is known as "fumed oak".
Activity: Short animation
using http://www.xtranormal.com/ or http://goanimate.com/ make a short of animation of people discussing which kind of finish is good for different kinds of wood and why. You must use no less than 3 examples of your choice.